THIS KIT IS EVERYTHING YOU NEED TO BUILD AN AR-10 EXCEPT A STRIPPED LOWER.
The receiver is a flat top M4 Mil-Spec upper receiver are forged CNC Machined from 7075-T6 Aluminum, the hardest and most durable material of any upper! This 22” 6.5 Creedmoor barrel is made from 4150 Chrome Moly steel, has 1:8 twist rate & rifle length gas system. The rail is a CBC- GEN 3 15″ .308 ULTRA SLIM M-LOCK FREE FLOAT CLAMP-ON STYLE HAND GUARD W/DETACH RAILS made from Airplane Aluminum and then hard coat anodized to improve the strength!
BOLT CARRIER GROUP AND CHARGING HANDLE INCLUDED
Barrel: 22″ 6.5 Creedmoor Melonite Barrel Chrome Moly
Twist Rate: 1:8
Feed Ramps: M4
BCG: Case Hardened 8620 Steel Nitride Coated, M4/AR-15 Compatible, Mil-Spec/MP Tested
Gas Block: Steel .750 Low Profile
Gas Tube: DGI Stainless Rifle Length
Muzzle Device: Afterburner Compensator
Rail: CBC- GEN 3 15″ .308 ULTRA SLIM M-LOCK FREE FLOAT CLAMP-ON STYLE HAND GUARD W/DETACH RAILS
Upper Receiver: Forged Upper Receiver
Upper Components: Mil-Spec Forward Assist, Mil-Spec Dust Cover, and Brass Deflector
CBC Industries Buttstock Kit includes:
- Sopmod stock
- Locking clip to ensure placement
- Mil-Spec Receiver Extension
- Mil-Spec Spring
- End Plate
- Locking Castle Nut
Complete AR-15 Lower Parts Kit ready for installation in your lower receiver. Standard AR-15 components include:
Hammer, Hammer Pin, Hammer Spring, Trigger, Trigger Pin, Trigger Spring, Trigger Guard ,Trigger Guard Pin, Disconnector, Disconnector Pin, Safety Selector, Safety Selector Detent, Safety Selector Spring, Euronamics Grip, Pistol Grip Screw, Pistol Grip Lock Washer, Bolt Catch, Bolt Catch Spring, Bolt Catch Buffer, Bolt Catch Roll Pin, Take Down Pin, Pivot Pin, Take down & Pivot Detent (x2), Take down & Pivot Spring (x2), Magazine Catch, Magazine Catch Button, Magazine Catch Spring, Buffer Retaining Pin,Buffer Retaining Pin Spring
Failure to observe safe firearm handling practices may result in serious bodily injury or death. CBC Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product. Additionally, it is highly recommended that the firearm (as with all new firearms) is thoroughly inspected, cleaned and oiled prior to use.
Product Details: AR-10 Creedmoor Rifle Kit – 22″/ 6.5 Creedmoor/ 1:8 / 15″ CBC M-LOK AR-10 Handguard / Rail / Bolt Carrier Group / Charging Handle / AR-10 Buttstock Kit / AR-10 Lower Parts Kit
➲ Enhanced Ergonomic Grip
Designed for performance, this grip creates a better interface between the shooter and firearm. Made from a molded hard polymer with a molded over rubber surface, provides a more positive grip and a better weapon control than a standard pistol grip. This style offers superior comfort and helps prevent fatigue with its ergonomically correct finger grooves, providing you with an ergonomic and shooter focused grip for your AR build.
➲ 6.5 Creedmoor Barrel
Perfect for long-range target shooters and hunters, the 6.5 Creedmoor was originally designed as an across-the-course high power rifle cartridge. While it excels at its intended role, it is a favorite among the precision rifle crowd. This barrel was designed to be built on the AR10 platform. Machined from 4150 chrome moly steel with a 1:8 twist rate and nitride finish, this barrel will deliver round after round consistently and accurately.
➲ Rifle Length Gas Tube
An essential component to your AR15 is the gas tube, which keeps your build up and running. This gas tube is constructed from corrosion resistant stainless steel ensuring a lifetime of service.
➲ .750 Low Profile Gas Block
The gas block is a critical link in the chain that is too often overlooked. This component ensures that your AR runs reliably. Made from high-quality steel with a smooth nitride finish, this gas block is efficiently designed to stay put with the percussion of gunfire. With its low profile this gas block allows it to fit under the most ergonomically designed handguards and rails on the market.
➲ Sopmod Buttstock
Sought after by military professionals and firearms enthusiasts, for its exceptional cheek weld and storage capabilities this stock will fit a Mil-Spec Receiver Extension (Buffer Tube). With its snag-free design, there are no sharp edges to tangle the rifle in the sling, MOLLE gear, or other kits.
➲ Standard Charging Handle
A central component of your AR-10, the charging handle not only assists in chambering a round but is your main tool to clear a round that won’t eject cleanly. The 7075-T6 aluminum design results in a rugged and capable charging handle for your AR-15. With lightweight aluminum construction and traditional snag-free latch design, this charging handle provides superior function and reliability.
➲ AR15 Linear Compensator
This AR15 Linear compensator works very well with any AR style pistol or SBR. This compensator helps to mitigate concussion while helping to reduce flash. The inside was designed with 12 expansion chambers, letting the gases expand and dissipate, making shooting in close proximity a much more enjoyable experience for everyone involved. Generation 2 has been manufactured to be 30% lighter when compared to the previous version. If you're running a shorter barrel and don't want the nasty concussion associated with muzzle blast from a stubby barrel, this linear compensator won't let you down.
➲ Buffer Tube Assembly
This AR-10 Buffer Tube Assembly comes with everything you need to get your next ar build ready. Assembly includes buffer tube, castle nut, endplate, spring & carbine buffer. The tube is extruded from 6061-T6 aluminum and has a matte black hardcoat anodized finish. This assembly features a snug fit to ensure no unwanted buttstock movement during operation. In addition, it allows for any desired 6 position placement with zero restrictions giving you the most comfortable fit and versatility.
➲ Bolt Carrier Group
There is nothing more crucial to the performance of your AR-10 than the bolt carrier group. Made to DPMS and finished with a superior quality parkerized finish that protects against corrosion and heat, our BCG won’t let you down. In order to ensure that it will run beautifully in your AR-15, each bolt carrier group undergoes high-pressure testing (HPT), and magnetic particle inspection (MPI). Whether you’re looking for a drop-in DPMS quality replacement for your current AR or are going for a new build, this bolt carrier group provides you with the reliability and performance you expect from a first-rate product.
CBC AR-10 rifle kits present you with an opportunity to acquire an AR-10 rifle at a discounted price by enabling you to take on the assembly process yourself. We provide a versatile selection of AR-10 rifle kits in multiple calibers and configurations. Our AR-10 rifle kits offer superior quality, dependability, and performance that will satisfy the most demanding shooter. The quality of our AR-10 rifle kit parts are backed by our Lifetime Warranty – if any component of a CBC rifle kit becomes defective, CBC will repair or replace it at no charge.