Sale!

AR-15 Grendel Rifle Kit – 18″ Stainless / 6.5 Grendel / 1:8 / 15″ Gen 1 AR-15 Handguard / Rail / Bolt Carrier Group / Charging Handle / AR-15 Buttstock Kit / AR-15 Lower Parts Kit

THIS KIT IS EVERYTHING YOU NEED TO BUILD AN AR-15 EXCEPT A STRIPPED LOWER. The receiver is a flat top M4 Mil-Spec upper receiver are forged CNC Machined from 7075-T6 Aluminum, the hardest and most durable material of any upper! This 18” 6.5 Grendel Stainless barrel is made from 4150 Chrome Moly steel, has 1:8 twist rate & mid-length gas system. This incredible rail has 200% increase in keymods, so your attachment position options are endless! The rail is a 15” CBC Keymod rail made fro - [READ MORE BELOW]

This product has been discontinued.

Description

THIS KIT IS EVERYTHING YOU NEED TO BUILD AN AR-15 EXCEPT A STRIPPED LOWER.

The receiver is a flat top M4 Mil-Spec upper receiver are forged CNC Machined from 7075-T6 Aluminum, the hardest and most durable material of any upper! This 18” 6.5 Grendel Stainless barrel is made from 4150 Chrome Moly steel, has 1:8 twist rate & mid-length gas system. This incredible rail has 200% increase in keymods, so your attachment position options are endless! The rail is a 15” CBC Keymod rail made from Airplane Aluminum and then hard coat anodized to improve the strength!

BOLT CARRIER GROUP AND CHARGING HANDLE INCLUDED

 

Barrel: 18″ 6.5 Grendel Stainless Barrel Chrome Moly

Twist Rate: 1:8

Feed Ramps: M4

BCG: Case Hardened 8620 Steel Nitride Coated, M4/AR-15 Compatible, Mil-Spec/MP Tested

Gas Block: Steel .750 Low Profile

Gas Tube: DGI Stainless Mid-Length

Muzzle Device: MB07 Flash Hider

Rail: 15″ CBC Free Float Keymod Rail

Upper Receiver: Forged Upper Receiver

Upper Components: Mil-Spec Forward Assist, Mil-Spec Dust Cover, and Brass Deflector

 

CBC Industries Buttstock Kit includes:

  • Multiple sling attachment points including QD swing swivel sockets
  • Large rubber butt-pad that is removable
  • 6 Position Alpha stock
  • Locking clip to ensure placement
  • Mil-Spec Receiver Extension
  • Mil-Spec Spring
  • Buffer
  • End Plate
  • Locking Castle Nut

Complete AR-15 Lower Parts Kit ready for installation in your lower receiver. Standard AR-15 components include:

Hammer, Hammer Pin, Hammer Spring, Trigger, Trigger Pin, Trigger Spring, Trigger Guard ,Trigger Guard Pin, Disconnector, Disconnector Pin, Safety Selector, Safety Selector Detent, Safety Selector Spring, Pistol Grip, Pistol Grip Screw, Pistol Grip Lock Washer, Bolt Catch, Bolt Catch Spring, Bolt Catch Buffer, Bolt Catch Roll Pin, Take Down Pin, Pivot Pin, Take down & Pivot Detent (x2), Take down & Pivot Spring (x2), Magazine Catch, Magazine Catch Button, Magazine Catch Spring, Buffer Retaining Pin,Buffer Retaining Pin Spring

 

SAFETY WARNING:

Failure to observe safe firearm handling practices may result in serious bodily injury or death. CBC Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product. Additionally, it is highly recommended that the firearm (as with all new firearms) is thoroughly inspected, cleaned and oiled prior to use.

Product Details: AR-15 Grendel Rifle Kit – 18″ Stainless / 6.5 Grendel / 1:8 / 15″ Gen 1 AR-15 Handguard / Rail / Bolt Carrier Group / Charging Handle / AR-15 Buttstock Kit / AR-15 Lower Parts Kit

➲ Midlength Gas Tube

An essential component to your AR15 is the gas tube, which keeps your build up and running. This gas tube is constructed from corrosion resistant stainless steel ensuring a lifetime of service.

➲ .750 Low Profile Gas Block

The gas block is a critical link in the chain that is too often overlooked. This component ensures that your AR runs reliably. Made from high-quality steel with a smooth nitride finish, this gas block is efficiently designed to stay put with the percussion of gunfire. With its low profile this gas block allows it to fit under the most ergonomically designed handguards and rails on the market.

➲ Upper Receiver

The foundation of all good AR's is built upon a dependable upper receiver. CBC upper receivers offer best-in-class quality while providing you years of dependable service. Boasting a MIL-SPEC type III hard coat anodized finish and machined from 7075-T6 forged aluminum, this M4 flat-top receiver delivers a lifetime of superior function. You want your AR built upon a solid platform - this receiver gives you the confidence that your AR-15 will function when it counts most.

➲ Standard MIL-SPEC Charging Handle

A central component of your AR-15, the charging handle not only assists in chambering a round but is your main tool to clear a round that won’t eject cleanly. The 7075-T6 aluminum design results in a rugged and capable charging handle for your AR-15. With lightweight aluminum construction and traditional snag-free latch design, this charging handle provides superior function and reliability.

➲ Keymod Handguard

Your AR-15 handguard has huge implications in terms of how much you enjoy your shooting experience. Our Keymod handguard offers more than just the accuracy enhancements that come with a free-floating rail. It features a full length picatinny top rail that sits flush with M4 flat top receivers allowing you to have more space for optics and back up iron sights. Designed with size and weight savings in mind, it features featuring picatinny inserts at 3:00, 6:00 & 9:00 positions. The slim profile is comfortable to grip while still allowing enough room for low profile gas blacks underneath. This AR-15 handguard is machined from 6061 aluminum, has a hard coat anodized black finish, resulting in a durable and dependable mounting platform, providing you with strength and stability.

Additional information

Weight 7.95 lbs
Dimensions 36 × 4.5 × 4.5 in
Platform

Caliber

Barrel Length

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.