Sale!

AR-10 Complete Upper Assembly – 16″ / .308 Win / 1:10 / 15″ Hera Keymod AR-10 Handguard / Rail with BCG & CHH

(4 customer reviews)

This AR-10 upper assembly is DPMS Patterned. The 15" Hera Arms Keymod design features Picatinny at the 12 o'clock position with Keymod slots at the 3, 6, and 9 o'clock positions to mount your favorite accessories. Features: 7075-T6 Aluminum DPMS Patterned Anodized Receiver Carbine Gas Tube Assembly 16" .308 Winchester Barrel 4150 Chrome Moly Steel Nitride Coated Barrel Standard Flash Hider Twist Rate: 1:10 15" Hera Arms Keymod Handguard/Rail with Picatinny Bolt Carrier Group & - [READ MORE BELOW]

SKU: 160-330 Category: Tag:

Description

copy of ar 10 complete upper assembly 16 308 win 12 hera keymod ar 10 handguard rail

This AR-10 upper assembly is DPMS Patterned. The 15″ Hera Arms Keymod design features Picatinny at the 12 o’clock position with Keymod slots at the 3, 6, and 9 o’clock positions to mount your favorite accessories.
Features:

7075-T6 Aluminum
DPMS Patterned Anodized Receiver
Carbine Gas Tube Assembly
16″ .308 Winchester Barrel
4150 Chrome Moly Steel Nitride Coated Barrel
Standard Flash Hider
Twist Rate: 1:10
15″ Hera Arms Keymod Handguard/Rail with Picatinny
Bolt Carrier Group & Charging Handle

** Our receivers do NOT fit DPMS Gen 2 Lowers **

Product Details: AR-10 Complete Upper Assembly – 16″ / .308 Win / 1:10 / 15″ Hera Keymod AR-10 Handguard / Rail with BCG & CHH

➲ .750 Low Profile Gas Block

The gas block is a critical link in the chain that is too often overlooked. This component ensures that your AR runs reliably. Made from high-quality steel with a smooth nitride finish, this gas block is efficiently designed to stay put with the percussion of gunfire. With its low profile this gas block allows it to fit under the most ergonomically designed handguards and rails on the market.

➲ A2 Flash Hider

The muzzle device is designed to perform a specific task, like suppress flash intensity or reduce felt recoil. This A2 Flash Hider is machined from quality steel and finished with an exceptionally corrosion resistant salt bath nitride for a lifetime of service. It provides effective flash suppression that preserves the shooter’s night vision by disrupting the muzzle flash when firing in low lighting conditions. While its closed bottom with top and side ports offers reduced dust signature when shooting from the prone position while additionally acting as a compensator.

➲ Barrel

The barrel is one of the few components that directly affect the accuracy and weight of your build. This barrel has a nitride finish for increased strength and durability. Featuring a rigid barrel design, this barrel is a favorite among hunters. This barrel offers a 1:10 twist rate, that is excellent for accuracy with various bullets. It is corrosion resistant resulting in an extended barrel life that is longer than conventional chrome lining. Thus, being the perfect barrel for long distance shooting, hunting and practically any outdoor shooting application you’ll subject your AR-10 too.

➲ Standard Charging Handle

A central component of your AR-10, the charging handle not only assists in chambering a round but is your main tool to clear a round that won’t eject cleanly. The 7075-T6 aluminum design results in a rugged and capable charging handle for your AR-15. With lightweight aluminum construction and traditional snag-free latch design, this charging handle provides superior function and reliability.

➲ Bolt Carrier Group

There is nothing more crucial to the performance of your AR-10 than the bolt carrier group. Made to DPMS and finished with a superior quality parkerized finish that protects against corrosion and heat, our BCG won’t let you down. In order to ensure that it will run beautifully in your AR-15, each bolt carrier group undergoes high-pressure testing (HPT), and magnetic particle inspection (MPI). Whether you’re looking for a drop-in DPMS quality replacement for your current AR or are going for a new build, this bolt carrier group provides you with the reliability and performance you expect from a first-rate product.

Additional information

Weight 6 lbs
Dimensions 34 × 5 × 5 in
Platform

Caliber

Barrel Material

Barrel Coating

Barrel Length

Twist Rate

Rail/Handguard

4 reviews for AR-10 Complete Upper Assembly – 16″ / .308 Win / 1:10 / 15″ Hera Keymod AR-10 Handguard / Rail with BCG & CHH

  1. Dan

    Received this upper in an 18 inch barrel. Mated it up to a PA-10 lower and the fit is perfect. Took it to the range today and had two casings in a row jamb in the barrel. Tried better ammo and functioned perfectly. After firing 20 rounds of federal 168 grain had it sighted in and was in at 1 moa. went back to mag with military grade ammo and ran through 20 rounds no problem. Next mag same ammo as first and the case stuck again and extractor tore lip off case. Looked at the case and it was stamped CBC. In the end the upper was awesome when using 4 different ammo other than CBC. I am very happy and have suggested CBC for uppers to several people including two at range today. By the way, Chris said I would be happy with Barrel and he was right.

  2. Dan

    My last review of this after first range use was just that. I must have had some bad ammo because everything else now that it is well broke in ( around a thousand rounds) works flawlessly. When you get the upper it is totally dry. Oil everything for break in. I love to shoot this gun. With a scope and a sand bag it is at or less than 1 MOA with decent ammo. It is 1 to 2 moa with surplus. Easily scoring 3 inch bulls at 200. I agree with another review that the forward assist is a joke. Never needed it but the BCG has no ribs to push forward and the assist is part of the brass deflector. Overall a really good 308 upper at a great price. Thanks CBC will be ordering a 300 Black out soon.

  3. Chris

    It took over 6 weeks to get but the price and the quality made up for it in the end. Had issues getting the 16″ barrel and was upgraded to an 18″ and at first I was not sure since I wanted compact. Seemed to group decent at the indoor range at 25 yards but once it got above 24 degrees and went to a 100 yard range to my surprise with a 6X scope I was getting under an inch group with 150gr Hornady FMJ that I loaded for a FAL. I am sure with custom loading and a higher power scope I could get 1/2 MOA. The packaging was the best of any company by far. I kept the box in case I needed to store the upper. The bolt is perfect and is above any of my ARs. Not sure if they manufacture it or outsource but is flawless with no machine marks and smooth like it was polished.

  4. Joe Moore

    Received my 308 and 7.62×39 uppers recently. found the fit and finish to be very good. I will use more uppers for future builds. Looking forward to taking these to the range.

Only logged in customers who have purchased this product may leave a review.